NETGEAR  WNDR3700V2  Wireless Dual Band Gigabit Router

Physical Specifications
Dimensions 223 x 153 x 31 mm (8.8 x 6.0 x 1.2 in)
Weight 0.5 kg (1.2 lb)
Environmental Specifications
Operating temperature 0? to 40? C (32º to 104º F)
Operating humidity 90% maximum relative humidity, noncondensing
Electromagnetic Emissions
Meets requirements of: FCC Part 15 Class B
EN 55 022 (CISPR 22), Class B
C-Tick N10947
Interface Specifications
LAN 10BASE-T, or 100BASE-Tx/1000BASE-Tx, RJ-45
WAN 10BASE-T, or 100BASE-Tx/1000BASE-Tx, RJ-45
Wireless Maximum wireless signal rate complies with the IEEE
802.11 standard. Actual throughput will vary. Network
conditions and environmental factors, including
volume of network traffic, building materials and
construction, and network overhead, lower actual
data throughput rate.
Radio Data Rates Auto Rate Sensing
Frequency 2.4 GHz & 5 GHz
Data Encoding Standards
IEEE 802.11n version 2.0
IEEE 802.11n, IEEE 802.11g, IEEE 802.11b 2.4 GHz
IEEE 802.11n, IEEE 802.11a 5.0 GHz
Maximum Computers Per Wireless
Network
Limited by the amount of wireless network traffic
generated by each node. Typically 30-70 nodes.
Operating Frequency Ranges (2.4GHz) 2.412–2.462 GHz (US)
2.412–2.472 GHz (Japan)
2.412–2.472 GHz (Europe ETSI)
Table 4. Wireless Router Default Configuration Settings (continued)
Feature Default Setting
Technical Specifications 38
Restoring the Default Password and Configuration
Settings
You can restore the factory default configuration settings that reset the router’s user name to
admin, the password to password, and the IP address to 192.168.1.1.
To restore the factory default configuration settings:
1. Use a sharp object such as a pen or a paper clip to press and hold the restore factory settings
button, located on the bottom of the router, for about 5 seconds, until the Power light begins to
blink (see “Router Label” on page 6).
2. Release the restore factory settings button, and wait for the router to restart, and for the Power
light to stop blinking and become solid green.
The factory default settings will be restored so that you can access the router from your Web
browser using the factory defaults.
Operating Frequency Ranges (5G) 5.18–5.24 + 5.745–5.825 GHz (US)
5.18–5.24 GHz (Europe ETSI)
802.11 Security 40-bit (also called 64-bit) and 128-bit WEP, WPAPSK and WPA2-PSK

NETGEAR  WNDR3700V2  Wireless Dual Band Gigabit Router

Maximum Downstream Data Rate600 Mbps
Maximum Wireless Data Rate600 Mbps
ColorBlack
ConnectivityWireless-Wi-Fi 802.11g, Wireless-Wi-Fi 802.11n, Wireless, Wireless-Wi-Fi 802.11b, Wireless-Wi-Fi 802.11a, Wireless (Wi-Fi), Wired-Ethernet (RJ-45)
FeaturesDual-Band
PortsEthernet (RJ-45), USB 2.0 for sharing
TypeCable
ModelNETGEAR N600
Number of LAN Ports4

• Simultaneous Dual Band—runs 2.4 and 5GHz bands
concurrently
• WiFi Transmitters/Receivers (Tx/Rx) - 2x2
(2.4GHz) + 2x2 (5GHz)
• Memory: 128 MB flash and 128 MB RAM
• Five (5) (1 WAN, 4 LAN) Gigabit Ethernet ports
• Reliable video and gaming with Automatic Quality
of Service (QoS)
• Supports Wireless Multimedia (WMM) based QoS
• IPv6 compliant (Internet Protocol Version 6)
Standards
• One (1) USB 2.0 port
• IEEE 802.11 b/g/n 2.4 GHz
• IEEE 802.11 a/n 5.0 GHz
• Five (5) 10/100/1000 (1 WAN and 4 LAN)
Gigabit Ethernet ports with auto-sensing
technology
System Requirements
• Broadband (cable, DSL) Internet service and
modem with Ethernet connection
• 2.4 or 5.0 GHz 802.11a/b/g/n specification
wireless adapter or an Ethernet adapter and

Security
• WiFi Protected Access®
 (WPA/WPA2—PSK)
• Double firewall protection
(SPI and NAT firewall)
• Denial-of-service (DoS) attack prevention

Uredjaj vrhunskih karakteristika, ispravan, malo je radio,kao nov je! stigao iz inostranstva. Stanje kao na slikama